Effect of change of sand properties on travel distance of ricocheted debris

The debris from exploded buildings can ricochet after colliding with the ground, thus increasing the debris travel distance and danger from any associated impacts or collisions. To reduce this danger, the travel distance of ricocheted debris must be accurately predicted. This study analyzed the change in the travel distance of ricocheted concrete debris relative to changes in the properties of a sand medium. Direct shear tests were conducted to measure the change in internal friction angle as a function of temperature and water content of the sand. Finite element analysis (FEA) was then applied to these variables to predict the speed and angle of the debris after ricochet. The FEA results were compared with results of low-speed ricochet experiments, which employed variable temperature and water content. The travel distance of the debris was calculated using MATLAB, via trajectory equations considering the drag coefficient. As the internal friction angle decreased, the shear stress decreased, leading to deeper penetration of the debris into the sand. As the loss of kinetic energy increased, the velocity and travel distance of the ricocheted debris decreased. Changes in the ricochet velocity and travel distance of the debris, according to changes in the internal friction angle, indicated that the debris was affected by the environment.     

Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation

In current guidelines, the free air blast loads (overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design. However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads, three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design.     

具有节点失效的网络可靠度的信息交互算法

提出了一种用于计算具有节点失效的网络可靠度的新计算方法。该算法依据不交化代数及协同计算的思想,采用节点信息义互的方法直接获得网络的不交化最小路集。算法简便易行,具有分布计算的特点,为大型网络系统的可靠性度计算提供了一种新的途径。     

角度欺骗有源假目标的动力学特性

针对高空高速目标探测过程中可能出现的角度类欺骗有源假目标,从理论上系统地分析了其动力学性质,导出了假目标的动力学方程,并分析了假目标的机械能和动量矩守恒问题。理论分析和仿真试验均表明,具有固定角度欺骗的方位有源假目标其动力学特性和真实目标完全一致,在动力学上是无法鉴别真伪的;除此之外的其他角度类欺骗有源假目标均不满足高空高速目标椭圆轨道特性以及动力学守恒定律,利用这种差异可以在数据处理层对假目标进行鉴别。     

自修复飞控系统故障检测与隔离软件系统

介绍了一个自修复飞行控制系统故障检测和隔离实时工程软件系统,该系统按照软件工程规范、采用等价空间法和残差向量的概率信息融合法研制和开发,不仅能对飞行控制系统的突变故障——作动器卡死故障和控制舵面损伤故障进行实时检测和隔离,而且具有良好的用户界面。仿真研究表明该软件系统具有良好的鲁棒性和实时性。     

一种具有抑风性能的综合火力/飞行控制系统

提出了飞机中性稳定的直接力控制模态。将这一模态应用于综合火力/飞行控制中的空-空机炮攻击,着重研究了中型稳定模态的抗垂风性能。此模态的应用实现了航迹基本不变的机身瞄准直接力控制,提高了抗垂风能力,明显地改善了姿态跟踪精度,延长了交火时间,并最终减小了脱靶量。     

带数据传输的光学卫星成像调度系统关键技术研究

针对光学小卫星成像调度系统设计需求,考虑侧视、存储容量、能量和数据传输等复杂约束,面向小规模问题应用,设计了问题求解流程.建立了顶点和边都带权的成像约束图模型,并提出了基于标记更新最短路算法的复杂约束成像卫星调度算法解决成像方案生成过程;对数传方案生成过程,给出背包模型并采用带回看策略的贪婪启发式方法进行问题求解.实验结果表明,该方法是可行和适用的.     

高炮随动系统性能测量算法

针对火炮调炮精度检测中存在的不足, 提出了一种基于双目立体视觉的三重交会测量方法,在炮身管上附加球状标志物,利用CCD摄像机获取标志物图像,通过标志物成像的几何投影关系计算球心的三维坐标.为了降低图像识别误差的影响,对投影的识别位置进行拓展和细化,并对球心投影边界进行插值,摄像机光心与插值点连线射线形成了一个锥体,两摄像机的锥体分别与炮台球面相交形成曲面,计算两曲面公共部分的形心,即为球心位置.通过确定球心位置,对炮身管的高低角、方位角进行计算,从而检测火炮调炮的性能.实验证明,该算法简单、快速,具有较高的精度.     

无人机电子干扰条件下的路径规划

针对机载预警雷达结合地面雷达对低空突防无人机构成的严重威胁,提出一种基于A*算法的路径规划算法.该算法分析了电子干扰和无人机RCS对雷达探测空间的影响,建立了新的雷达探测空间模型和威胁模型进行路径规划,将A*算法应用于无人机的路径规划过程.在此基础上给出了应用该方法的具体步骤,并进行了MATLAB仿真.仿真结果表明:考虑电子干扰对雷达威胁区域影响的情况下规划的飞行路径飞行器能有效回避威胁,有效提高无人机的低空突防能力.     

考虑弹体动态特性的非奇异有限时间制导律

为满足导弹拦截机动目标时交会角约束和有限时间收敛的需求,建立了考虑弹体一阶动态特性的制导模型。把目标加速度视为有界外界干扰,同时结合非线性反步设计法中的动态面法,设计一种考虑弹体动态延迟的非奇异滑模制导律,并且证明了基于Lyapunov稳定性理论制导系统状态可渐进收敛到零。在所设计的制导律下,对单侧机动的低空高速目标进行仿真。仿真结果表明所设计的非奇异制导律可以有效降低弹体动态延迟带来的影响,而且具有较低的脱靶量与交会角误差;与考虑弹体动态特性和交会角约束的最优导引律相比,其具有更高的制导精度。